diff options
author | Unit 193 <unit193@unit193.net> | 2020-06-01 19:09:34 -0400 |
---|---|---|
committer | Unit 193 <unit193@unit193.net> | 2020-06-01 19:09:34 -0400 |
commit | 4ac436fed8d224dc27d0650684298777ec0b9cb0 (patch) | |
tree | 8ee09c5b88287c3b708cd76b837d963cbe6ba405 /inxi.1 | |
parent | c4d4d23f5d0ad5db0a588cc55d971f7e60623594 (diff) | |
download | inxi-4ac436fed8d224dc27d0650684298777ec0b9cb0.tar.bz2 inxi-4ac436fed8d224dc27d0650684298777ec0b9cb0.tar.xz inxi-4ac436fed8d224dc27d0650684298777ec0b9cb0.tar.zst |
New upstream version 3.1.01-1.upstream/3.1.01-1
Diffstat (limited to 'inxi.1')
-rw-r--r-- | inxi.1 | 59 |
1 files changed, 54 insertions, 5 deletions
@@ -1,4 +1,4 @@ -.TH INXI 1 "2020\-04\-22" inxi "inxi manual" +.TH INXI 1 "2020\-05\-31" inxi "inxi manual" .SH NAME inxi \- Command line system information script for console and IRC @@ -53,7 +53,7 @@ you can use those separately as well. For example: \fBinxi \-AG\fR | \fBinxi \-A \-G\fR | \fBinxi \-b\fR | \fBinxi \-c10\fR -| \fBinxi \-FxxzJy80\fR +| \fBinxi \-FxxzJy90\fR | \fBinxi \-bay\fR Note that all the short form options have long form equivalents, which are listed below. However, usually the short form is used in examples in order to @@ -157,6 +157,9 @@ The details for each CPU include a technical description e.g. \fBtype: MT MCP\fR * \fBUP\fR \- Uni (single core) Processor. +Note that \fBmin/max:\fR speeds are not necessarily true in cases of overclocked CPUs +or CPUs in turbo/boost mode. See \fB\-Ca\fR for alternate \fBbase/boost:\fR speed data. + .TP .B \-d\fR,\fB \-\-disk\-full\fR,\fB\-\-optical\fR Show optical drive data as well as \fB\-D\fR hard drive data. With \fB\-x\fR, adds a @@ -607,11 +610,12 @@ metric (imperial) (\fBmi\fR, default), imperial (metric) (\fBim\fR). If metric o not found,sets to default value, or \fBN/A\fR. .TP -.B \-y\fR,\fB \-\-width <integer>\fR +.B \-y\fR,\fB \-\-width [integer]\fR This is an absolute width override which sets the output line width max. Overrides \fBCOLS_MAX_IRC\fR / \fBCOLS_MAX_CONSOLE\fR globals, or the actual widths of the terminal. \fB80\fR is the minimum width supported. -\fB\-1\fR removes width limits. Example: \fBinxi \-Fxx\ \-y 130\fR +\fB\-1\fR removes width limits. If no value is given, it will set width +to 80. Examples: \fBinxi \-Fxx\ \-y 130\fR or \fBinxi \-Fxxy\fR .TP .B \-z\fR,\fB \-\-filter\fR @@ -944,6 +948,9 @@ data is simply not available as of 2018\-04\-03), location (only available from \- Adds \fBboost: [enabled|disabled]\fR if detected, aka \fBturbo\fR. Not all CPUs have this feature. +\- Adds CPU voltage and external clock speed (this is the motherboard speed). +Requires sudo/root and \fBdmidecode\fR. + .TP .B \-xxx \-D\fR \- Adds disk firmware revision number (if available). @@ -1033,6 +1040,48 @@ Format is \fBhexadecimal (decimal)\fR if greater than 9, otherwise \fBhexadecima \- Adds CPU microcode. Format is \fBhexadecimal\fR. +\- Adds socket type (for motherboard CPU socket, if available). If results doubtful +will list two socket types and \fBnote: check\fR. Requires sudo/root and \fBdmidecode\fR. +The item in parentheses may simply be a different syntax for the same socket, +but in general, check this before trusting it. +.nf +Sample: \fBsocket: 775 (478) note: check\fR +Sample: \fBsocket: AM4\fR +.fi + +\- Adds DMI CPU base and boost/turbo speeds. Requires sudo/root and \fBdmidecode\fR. +In some cases, like with overclocking or 'turbo' or 'boost' modes, voltage and +external clock speeds may be increased, or short term limits raised on max CPU speeds. +These are often not reflected in /sys based CPU \fBmin/max:\fR speed results, +but often are using this source. + +Samples: +.nf +CPU not overclocked, with boost, like Ryzen: +\fBSpeed: 2861 MHz min/max: 1550/3400 MHz boost: enabled base/boost: 3400/3900\fR + +Overclocked 2900 MHz CPU, with no boost available: +\fBSpeed: 2900 MHz min/max: 800/2900 MHz base/boost: 3350/3000\fR + +Overclocked 3000 MHz CPU, with boosted max speed: +\fBSpeed: 4190 MHz min/max: 1200/3001 MHz base/boost: 3000/4000\fR +.fi + +Note that these numbers can be confusing, but basically, the \fBbase\fR +number is the actual normal top speed the CPU runs at without boost mode, and the +\fBboost\fR number is the max speed the CPU reports itself able to run at. +The actual max speed may be higher than either value, or lower. +The \fBboost\fR number appears to be hard\-coded into the CPU DMI data, +and does not seem to reflect actual max speeds that overclocking or +other combinations of speed boosters can enable, as you can see from the +example where the CPU is running at a speed faster than +the min/max or base/boost values. + +Note that the normal \fBmin/max:\fR speeds do NOT show actual overclocked OR +boost/turbo mode speeds, and appear to be hard\-coded values, not dynamic real +values. The \fBbase/boost:\fR values are sometimes real, and sometimes not. +\fBbase\fR appears in general to be real. + \- Adds CPU Vulnerabilities (bugs) as known by your current kernel. Lists by \fBType: ... (status|mitigation): ....\fR for systems that support this feature (Linux kernel 4.14 or newer, or patched older kernels). @@ -1605,7 +1654,7 @@ Same as \fB\-\-wan\-ip\-url [URL]\fR \fBWEATHER_SOURCE\fR Values: [\fB0-9\fR]. Same as \fB\-\-weather\-source\fR. Values 4\-9 are not currently supported, but this can change at any time. -\fBWEATHER_UNIT\fR Values: [\fBc\fR|\fBf\fR|\fBcf\fR|\fBfc\fR]. Same as \fB\-\-weather\-unit\fR. +\fBWEATHER_UNIT\fR Values: [\fBm\fR|\fBi\fR|\fBmi\fR|\fBim\fR]. Same as \fB\-\-weather\-unit\fR. .TP .B Color Options |